Specifications

User Guide for the SIP-T48G IP Phone
142
7. Click Confirm to accept the change.
Note
According to the response message from the server, the IP phone will automatically
configure the BLF List keys beginning from the first unused DSS key (The default order of
BLF list keys assigned automatically is Line Key->Ext Key). Once any DSS key is seized,
the IP phone will skip to configure the next DSS key.
You can receive a visual or/and an audio alert (if enabled) on your phone when the
monitored user receives an incoming call. For more information, refer to Busy Lamp Field
(BLF) on page 137.
Note
You can record calls by tapping a record key on the phone. The SIP-T48G IP phone
supports record and URL record.
Two ways of call recording:
 Record: The phone sends a SIP INFO message containing a specific header “Record:
on/off” to trigger a recording.
 URL Record: The phone sends an HTTP URL request to trigger a recording. Contact
your system administrator for the predefined URL.
Note
To configure a record key via phone user interface:
1. Tap DSS Key.
2. Tap the desired line key.
3. Tap the gray box of the Type field.
4. Tap Key Event from the pull-down list.
5. Tap the gray box of the Key Type field.
6. Tap Record from the pull-down list.
Call record is not available on all servers. Contact your system administrator for more
information.
The pickup code is used in the following order of preference: BLF List Code
(Account->Advanced)>Directed Call Pickup Code (Account->Advanced)>Directed Call
Pickup Code (Features->Call Pickup). If all of them are not configured, taping the BLF List
key will directly call the monitored user when he/she receives an incoming call. For more
information about pickup Code, refer to Call Pickup on page 130.
For more information on BLF List URI/BLF List Code/BLF List Barge In Code/BLF List Retrieve
Call Parked Code, contact your system administrator.