Specifications

Basic Call Features
125
advance. Refer to Directory on page 37 for more information.)
- Tap the Directory soft key, and then tap Remote Phone Book. Search for the
contact and tap the desired contact to dial out. (Directory and remote phone
book should be configured in advance. Refer to Directory on page 37 and
Remote Phone Book on page 58 for more information.)
- Tap the History soft key, and then tap the desired list. Tap the desired entry to
dial out.
3. After the party answers the call, press or tap the Transfer soft key to complete
the transfer.
If you are using a handset, the transfer can be completed by hanging up the handset.
You can enable or disable call waiting on the phone. If call waiting is enabled, you can
receive another call when there is already an active call on the phone. Otherwise,
another incoming call is automatically rejected by the phone with a busy message
when there is an active call on the phone. You can also enable or disable the phone to
play a warning tone when receiving another call.
To configure call waiting via phone user interface:
1. Tap ->Features->Call Waiting.
2. Tap the On radio box of the Call Waiting field.
3. Tap the On radio box of the Play Tone field.
4. (Optional.) Enter the call waiting on code or off code respectively in the On Code or
Off Code field.
5. Tap the Save soft key to accept the change or to cancel.
Call waiting is configurable via web user interface at the path Features->General
Information.