Specifications

Basic Call Features
99
You can enter the number using the keypad displayed on the touch screen.
3. Press , , or tap the Send soft key.
The # key is configured as a send key by default. You can also set the * key as the send
key, or set neither. For more information, refer to the Key as Send on page 33.
You can also tap the Callog soft key or the Directory soft key to search for an entry or
contact after picking up the handset, and then tap the desired entry or contact to place
a call.
Note
To place a call using the hands-free speakerphone mode:
Do one of the following:
- With the handset on-hook, press or tap the line key to obtain a dial tone.
Enter the desired number using the keypad or the on-screen keypad.
Press , or tap the Send soft key.
- With the handset on-hook, enter the desired number using the keypad.
Press , , or tap the Send soft key.
To place a call using the headset:
Do one of the following:
- With the optional headset connected, press to activate the headset mode.
Tap the line key to obtain a dial tone.
Enter the desired number using the keypad or the on-screen keypad.
You can also dial using the SIP URI or IP address. To obtain the IP address of a phone,
press the OK key when the phone is idle. The maximum SIP URI or IP address length is 32
characters. For example, SIP URI: [e-mail], IP: 192.168.1.15.
Your phone may not support direct IP dialing. Contact your system administrator for more
information.