Quick Start Guide

1. Connect the network and power for the base station in one of the

following ways, as shown below:

Assembling the Phone

a. AC Power Option

The following item is an optional accessory:

W56H Handset Protective Case

2. Insert the battery into the handset, as shown below:

b. PoE (Power over Ethernet) Option

Assembling the DECT Phone

Note:

If inline power (PoE) is provided, you do not need to connect the power adapter.

Make sure the hub/switch is PoE-compliant. The base station should be used with

Yealink original power adapter (5V/600mA) only. The use of the third-party power

adapter may cause the damage to the base station.

Note: You need to purchase it separately if required.

battery

IEEE 802.3af compliant

PoE Hub/Switch