Operation Manual

User Guide for the W56P IP DECT Phone

To configure anonymous call rejection code via web user interface:

1. Click on Account->Basic.

2. Select the desired account from the Account field.

3. Select the desired value from the pull-down list of Send Anonymous Rejection Code.

The phone will send the configured on code or off code depending on your selection when

you enable or disable anonymous rejection call feature on the phone.

4. Enter the anonymous call rejection on code and off code in the On Code and Off Code

field respectively.

5. Click Confirm to accept the change.

Voice Mail

You can leave voice mails to someone else. You can also receive and listen to voice mails via the

handset. Voice mail feature ensures that you will never miss any important messages. When

receiving a new voice mail, the icon appears on the LCD screen with the number of unread

voice mails, and the power LED slowly flashes red.

Note

Voice Mail Tone

You can enable or disable the phone to play a warning tone when receiving a voice mail. Voice

mail tone is enabled by default.

Voice mail feature is not available on all servers. Contact your system administrator for more

information.