Operation Manual

Call Features
79
- If the park retrieve code is configured, press the park retrieve key (if configured).
The handset will dial the configured park retrieve code.
2. Follow the voice prompt, do one of the following:
- Press where the call is parked.
- Enter the desired extension followed by # (e.g., 4605#) on any phone.
To configure call park feature in transfer mode via web user interface:
1. Click on Features->Call Pickup.
2. Select Transfer from the pull-down list of Call Park Mode.
3. Select Enabled from the pull-down list of Call Park.
If Enabled is selected, the Call Park option is available during a call.
4. (Optional.) Enter the call park code in the Call Park Code field.
5. (Optional.) Enter the park retrieve code in the Park Retrieve Code field.
6. Click Confirm to accept the change.
To park a call in Transfer mode:
1. During a call, press the Options soft key, and then select Call Park.
- If the call park code is not configured, you need to enter the call park code (e.g., *01).
Press , or . The call will be transferred to the shared parking lot.
- If the call park code is configured, the call will be directly transferred to the shared
parking lot.
Note
To retrieve a parked call in Transfer mode:
1. Do one of the following:
For some servers, the system will return a specific call park retrieve number (park retrieve code)
from which the call can be retrieved after parking successfully.