Operation Manual

User Guide for the W56P IP DECT Phone
78
To configure call park feature in FAC mode via web user interface:
1. Click on Features->Call Pickup.
2. Select FAC from the pull-down list of Call Park Mode.
3. Select Enabled from the pull-down list of Call Park.
If Enabled is selected, the Call Park option is available during a call.
4. (Optional.) Enter the call park code in the Call Park Code field.
5. (Optional.) Enter the park retrieve code in the Park Retrieve Code field.
6. Click Confirm to accept the change.
To park a call in FAC mode:
1. During a call, press the Options soft key, and then select Call Park.
- If the call park code is not configured, you need to enter the call park code.
Press , or .
- If the call park code is configured, the phone will dial the configured call park code.
2. Do one of the following:
a) If you want to park the call against the local extension.
1) Press .
If the call is parked successfully, you will hear a voice prompt confirming that the
call is parked.
b) If you want to park the call against desired extension.
1) Enter an extension (e.g., 4605) where you want to park the call.
2) Press or .
If the call is parked successfully, you will hear a voice prompt confirming that the
call is parked. The call is parked against the extension you entered.
To retrieve a parked call in FAC mode:
1. Do one of the following:
- If the park retrieve code is not configured, dial the park retrieve code (e.g., *88).