Operation Manual

Call Features

If any other party in the conference ends the call, the remaining parties stay connected.

You can use call park feature to place a call on hold, and then retrieve the call from another

phone in the system (for example, a phone in another office or conference room). If the parked

call is not retrieved within a period of time defined by the system, the phone performing call

park will receive the call back.

Note

The IP phone supports call park feature under the following modes:

 FAC mode: park the call to the local extension or a desired extension through dialing the

park code, and retrieve the parked call from the local extension or desired extension

through dialing the park retrieve code.

 Transfer mode: park the call to shared parking lot through performing a blind transfer to a

call park number (call park code), and retrieve the parked call from the shared parking lot

through dialing the park retrieve code.

You may need to configure the call park code and park retrieve code before using call park

feature. You can configure a park retrieve key.

To configure a park retrieve via the handset:

1. Press to enter the main menu.

2. Select Settings->Shortcut.

The LCD screen displays the changeable shortcuts with features currently assigned to

them.

3. Press or to highlight the desired shortcut.

4. Press the Change soft key to access the available features.

The feature currently assigned to the selected key is highlighted and followed by a left

arrow.

5. Press or to highlight the desired feature.

6. Press the OK soft key to accept the change or the Back soft key to cancel.

Note

Call park is not available on all servers. Contact your system administrator for more information.

The call park code and park retrieve code are predefined on the system server. Contact your

system administrator for more information.