Operation Manual

User Guide for the W56P IP DECT Phone

To transfer a call to another party when there are two calls on the handset:

1. Place a call to user A.

2. Place another call to user B.

Two calls are established on the handset.

3. Select the desired call (e.g., the call with user A) and make sure the call is active.

4. Press the Options soft key, and then select Call Transfer.

The LCD screen displays the target party (user B) you will transfer the call to.

5. Press the Transfer soft key to complete the transfer.

The handset returns to the idle screen. Call is established between user A and User B.

Note

Conference Call

You can create a conference with other two external parties (or an external and an internal party)

using the phone’s local conference. The W56P IP DECT phone also supports network conference.

Note

Local Conference

You can use the handset to create a local conference with other parties. The handset supports

up to 3 parties (including yourself) in a conference call. You can create a conference between an

active call and a held call on the handset (on the same line or different lines).

To set up a local conference call with two external parties via the handset:

1. Place a call to the first party.

2. Press the Options soft key, and then select Conference.

3. Do one of the following:

- Enter the number of the second party or select the handset you want to add to the

conference.

Press , , or the Conf. soft key to dial out.

- Press the Directory soft key, and then select the desired contact.

Press , , or the Call soft key.

If both the office number and the mobile number of the contact are stored, select the

desired number and then press , , or the OK soft key to dial out.

4. When the second party answers the call, you can consult with him or her before adding the

Network conference is not available on all servers. For more information, contact your system

administrator.

The internal incoming call cannot be transferred.