Operation Manual

User Guide for the W56P IP DECT Phone

Call Mute

You can mute the microphone during an active call. When muting the microphone, you can hear

the other party but he or she cannot hear you. For example, if you do not want the other party

to listen to the conservation when you talk to someone in the room, you can mute the

microphone temporarily.

To mute a call:

1. Press during an active call.

The call is muted, and the icon is displayed on the LCD screen.

To un-mute a call:

1. Press again.

The icon disappears from the LCD screen.

Call Hold/Resume

You can place an active external call on hold. At any time, at most one active call can be in

progress on your handset. You can answer or make another call while placing the original call on

hold.

To place a call on hold:

1. Press the Options soft key during a call, and then select Hold.

The call is placed on hold, and the icon is displayed on the LCD screen.

To resume a hold call:

Do one of the following:

- Press the Resume soft key.

- Press .

Two calls on Hold:

If two calls are placed on hold on the handset, press the Resume soft key to resume the current

call. Press , or the Swap soft key to swap between two calls.

Note

Call Waiting

You can enable or disable call waiting feature on the handset. If call waiting feature is enabled,

When the call on the handset is placed on hold, placing the handset in the charger cradle will not

end the call.