Operation Manual

User Guide for the W56P IP DECT Phone

3. Select the desired handset, and then press the OK soft key.

Note

Answering Calls

When the handset registered to the base successfully, you can answer a call in three ways:

 Using the earpiece

 Using the speakerphone

 Using the earphone

Note

Answering When Not in Another Call

In all cases, the active call will appear on the LCD screen showing call duration and destination.

To answer a call using the earpiece:

1. Press or the Accept soft key.

To answer a call using the speakerphone:

1. Press .

To answer a call using the earphone:

1. With an earphone connected, press the Accept soft key.

Answering When in Another Call:

If you are during an active call, an incoming call arrives on the handset, do the following:

1. Press to select the incoming call.

2. Press , , or the Accept soft key.

The incoming call is answered, and the original call is placed on hold.

Ending Calls

To end an internal call:

1. Press the End soft key or .

You can ignore an incoming call by pressing the Silence soft key or reject an incoming call by

pressing the on-hook key.

You can also activate Do Not Disturb mode on a per-line basis to reject all incoming calls of the

specified line. For more information, refer to Do Not Disturb (DND) on page 71.

You can also make an IP call by directly dialing the IP address of any IP phone. For example, you

can enter 192*168*1*15 to dial the IP 192.168.1.15.