Manualshelf

Operation Manual

ManualsBrandsYealink ManualsOffice PhoneW56P IP Dect
71727374757677787980
Phone Settings
63
station. Other customized settings on the handset will be reset to factory settings after handset
reset. We recommend that you ask your system administrator for advice before resetting your
handset.
To reset the handset via the handset:
1. Press to enter the main menu.
2. Select Settings->System Settings->Handset Reset.
The LCD screen prompts “Reset handset to default?”.
3. Press the Yes soft key to reset the handset or the No soft key to cancel.
Auto Provision
You can trigger the auto provisioning process using the wizard. After you enter the user name
and password in the wizard and confirm to perform an update, the base station tries to connect
the RPS (Redirection and Provisioning Service) server. If the base station successfully connects
the RPS server, the RPS server will respond the base station with the URL for downloading the
configuration files. Then the base station will try to perform auto provisioning. Contact your
system administrator for the user name and password used to connect the RPS server.
To trigger the auto provisioning process via the handset:
1. Press to enter the main menu.
2. Select Settings->System Settings->Auto Provision.
3. Enter the system PIN (default: 0000) and then press the Done soft key.
4. Enter the valid value in the Username field and then press the OK soft key.
5. Enter the valid value in the Password field and then press the OK soft key.
The LCD screen prompts “Update now?”.
6. Press the Yes soft key to perform an update or the No soft key to cancel.
Eco Mode+
Eco mode+ turns off the transmission power and the radio waves emitted are virtually
zero when the phone is in the standby mode. If the eco mode+ is enabled, and there is
no signal interaction between the handset and the base station, the color of the signal
strength indicator on the idle screen will display in green. When a call comes in or a
connection occurs, the phone exits the eco mode+ automatically, and the signal
strength indicator on the idle screen changes from green to white.
To configure eco mode+ via the handset:
1. Press to enter the main menu.
2. Select Settings->System Settings->Eco Mode+.
3. Press the Change soft key.