Operation Manual

User Guide for the W56P IP DECT Phone
52
To delete one or more replace rules via web user interface:
1. Click on Settings->Dial Plan->Replace Rule.
2. Select one or more replace rules by clicking the replace rule(s) or checking the check
box(es).
3. Click Delete to delete the replace rule(s).
Note
Dial Now
You can configure one or more dial now rules (up to 10) on your handset. When the dialed
number matches the dial now string, the number will be dialed out automatically. For example, a
dial now rule is configured as "2xx", any entered three-digit string beginning with 2 will then be
dialed out automatically on the phone.
To add a dial now rule via web user interface:
1. Click on Settings->Dial Plan->Dial Now.
2. Enter the desired value (e.g., 2xx) in the Rule field.
3. Enter the desired line ID in the Account field or leave it blank.
For more information on the valid values for the Account field, refer to Replace Rule on
page 50.
4. Click Add to add the dial now rule.
When you enter the number “234” using the keypad, the phone will dial out “234”
automatically without the pressing of any key.
You can also edit or delete the dial now rule, refer to Replace Rule on page 50 for more
Replace rule is configurable via web user interface only.
Replace rule is applicable to all the handsets registered to the base station.