Operation Manual

Phone Settings
51
syntax in the table above), so that any string that matches the pattern will be replaced. This
feature is convenient for you to dial out a long number. For example, a replace rule is configured
as “Prefix: 1” and “Replace: 104”, when you want to dial out the number “104”, you just need to
enter “1” on the handset and then dial out.
To add a replace rule via web user interface:
1. Click on Settings->Dial Plan->Replace Rule.
2. Enter the string (e.g., 1) in the Prefix field.
3. Enter the string (e.g., 104) in the Replace field.
4. Enter the desired line ID in the Account field or leave it blank.
5. Click Add to add the replace rule.
When you enter the number “1” using the keypad and then dial out using the configured
account, the handset will dial out “104” instead.
Note
To edit a replace rule via web user interface:
1. Click on Settings->Dial Plan->Replace Rule.
2. Select the desired replace rule by clicking the replace rule or checking the check box.
3. Edit the value in the Prefix and Replace field respectively.
4. Enter the desired line ID in the Account field or leave it blank.
5. Click Edit to accept the change.
The valid value of the “Account” parameter can be one or more digits among 1, 2, 3, 4 and 5, each
of which represents a line ID. Multiple digits must be separated by commas. For example, when
you enter the value “1, 2” in the Account field, this dial plan rule will apply to account1 and
account2.
If you leave the Account field blank or enter 0, this dial plan rule will apply to all accounts.