Operation Manual

User Guide for the W56P IP DECT Phone
44
Placing a Call from Local Directory
To place a call from the local directory via the handset:
1. Press to enter the main menu.
2. Select Directory.
3. Press or to highlight the desired entry.
4. Do one of the following:
- Press , if only one number is stored for the contact in the local directory, the
phone will dial out the number directly.
- Press , if both the office number and the mobile number are stored for the
contact in the local directory, the screen will display two numbers.
Press or to highlight the desired number.
Press to dial out.
You can search for a contact from the desired lists when the phone is on the dialing screen. The
lists can be Local Directory, History, Remote Phone Book and LDAP.
To configure search source list in dialing via web user interface:
1. Click on Directory->Setting.
2. In the Search Source List In Dialing block, select the desired list from the Disabled column
and then click .
The selected list appears in the Enabled column.
3. Repeat the step 2 to add more lists to the Enabled column.
4. To remove a list from the Enabled column, select the desired list and then click .
5. To adjust the display order of search results, select the desired list and then click
or .
The LCD screen displays the search results in the adjusted order.