Operation Manual
User Guide for the W56P IP DECT Phone
42
Blacklist
Remote Phone Book
Local Directory
You can store the frequently used contacts in the handset’s local directory, where names and
numbers can be freely added, deleted and edited. You can store up to 100 contacts per handset,
each with a name, a mobile number and an office number. You can also dial a contact from the
local directory. This allows you to place calls without having to dial the number manually.
Adding Contacts
You can add contacts to your local directory manually or from the call history. You can also add
contacts to your local directory from the remote phone book. For more information, refer to
Remote Phone Book on page 46.
To add a contact to the local directory manually via the handset:
1. Press to enter the main menu.
2. Select Directory.
3. Press the Options soft key, and then select New Contact.
4. Enter the desired value in the Name, Number and Mobile field respectively.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
To add a contact to the local directory from the call history via the handset:
1. Press the History soft key when the handset is idle.
2. Press or to switch among All Calls, Missed Calls, Placed Calls and Received Calls.
3. Press or to highlight the desired entry.
4. Press the Options soft key, and then select Add To Local->New Entry.
You can also select Update Existing add the number to an existing contact.
5. Press or to set the number to be the office number or the mobile number, and then
press the OK soft key.
6. Enter the name of the new entry in the Name field.
7. Press the Save soft key to accept the change or the Back soft key to cancel.
Note
When you add a contact, the name is required, the office number and the mobile number cannot
be left blank at the same time.
If the information of the contact you want to add is totally same with that of an existing entry in
the local directory, the screen will prompt “Contact already exits. Please input others name or
update contact”.