Operation Manual

Phone Settings
35
To change the language for the web user interface:
1. Select the desired language from the pull-down list at the top-right corner of web user
interface.
Text displayed on the web user interface will change to the selected language.
Ring Tones
Ring tones are used to indicate incoming calls. You can distinguish between an internal and
external call by the ring tone. When receiving an incoming call, the handset rings the specified
ring tone.
To configure ring tones via the handset:
1. Press to enter the main menu.
2. Select Settings->Audio->Ring Tones->Melodies.
3. Press or to highlight the Intercom Call option or the desired line.
4. Press or to select and listen to the desired ring tone.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Advisory Tones
Advisory tones are acoustic signals of your handset, which inform you of different actions and
states. The following advisory tones can be configured independently of each other:
 Keypad Tone: plays when you press any key of the keypad.
 Confirmation: plays when you save settings or place the handset in the charger cradle.
 Low Battery: plays when the capacity of the battery is low and the handset requires
charging.
To configure advisory tones via the handset:
1. Press to enter the main menu.
2. Select Settings->Audio->Advisory Tones.
3. Press or to select the desired value from the Keypad Tone field.
4. Press or to select the desired value from the Confirmation field.