Operation Manual

User Guide for the W56P IP DECT Phone
30
The handset can also be turned on automatically when inserting the battery to the handset.
To turn the handset off:
1. Long press when the handset is idle.
Adjusting Volume
You can adjust the handset volume according to the noise level of the surrounding environment.
The handset supports 5 different volume levels. The default level is 3.
To adjust the volume when the phone is during a call:
1. Press to decrease the ringer volume, or press to increase the ringer volume.
The ringer volume can be adjusted using the menu or the predefined shortcuts (left and right
navigation keys) on the keypad when the handset is idle.
To adjust ringer volume via the handset:
1. Press to enter the main menu.
2. Select Settings->Audio->Ring Tones->Volume.
3. Press to decrease the ringer volume, or press to increase the ringer volume.
4. Press the Save soft key to accept the change or the Back soft key to cancel.
You can also press or to adjust the ringer volume when the handset is idle or ringing.
Note
Locking/Unlocking Keypad
You can lock the handset keypad to prevent all keys from being accidentally pressed.
To lock the keypad via the handset:
1. Long press when the handset is idle until the LCD screen prompts “Keypad Locked,
Press and hold ‘#’ to unlock!”.
The keypad is locked and the icon appears on the status bar.
You can still answer or reject incoming calls as usual. You can also end the call by
pressing .
To unlock the keypad via the handset:
1. Long press again until the LCD screen prompts “Keypad Unlocked”.
If the ringer volume is adjusted to the minimum, the icon will appear on the status bar, and
the silent mode will be activated. For more information, refer to Switching Silent Mode to On/Off
on page 31.