Operation Manual

User Guide for the W56P IP DECT Phone
28
includes:
 Base station status (IPv4 status or IPv6 status, firmware version, MAC address, device
certificate status, RFPI and network information)
- IPv4 uses a 32-bit address.
- IPv6 is an updated version of the current Internet Protocol to meet the increased
demands for unique IP addresses, using a 128-bit address.
 Handset status (model, hardware version, firmware version, IPUI code, SN code and area)
 Line status
Note
To check the base station status via the handset:
1. Press to enter the main menu.
2. Select Status->Base.
The LCD screen displays status information of the base station and the Network option.
3. Press or to scroll through and view the status information.
4. Select Network, and then press the Enter soft key.
The LCD screen displays the connected network information.
To check the handset status via the handset:
1. Press to enter the main menu.
2. Select Status->Handset.
The LCD screen displays the status information of the handset.
3. Press or to scroll through the status information.
To check the line status via the handset:
Do one of the following:
- Press the Line soft key when the handset is idle to check the line status directly.
- Press to enter the main menu.
Select Status->Line Status.
The LCD screen displays all lines registered to the currently used base station with icons for
indicating the line status. For example, the icon at the bottom of a line indicates that you
cannot place a call using this line on the handset.
Registering Accounts
The base station supports up to 5 lines. You can register an account for each line via web user
interface.
You can only check the handset status if the handset does not register to a base station.