Operation Manual

Basic Operations
23
Wait one second, and enter the next character (or number).
The default input methods are Abc, 123, ABC and abc.
To enter or edit data by the default input modes, do one of the following as shown below:
If you want to
Then you can
Switch among input modes.
Press one or more times to switch among
input modes (depending on the input mode you’ve
configured, refer to Configuring the Input Mode
on page 22). The current input mode is displayed
on the bottom right-hand corner of the LCD
screen.
Enter only digits (1),
uppercase (A) characters or
lowercase (a) characters.
Press a keypad key one or more times (depending
on what input mode you’re in) to enter the
characters that are displayed on the keypad key.
For example, if the input mode is ABC:
- To enter “A”, press once.
- To enter “B”, press twice quickly.
- To enter “C”, press three times quickly.
For other input modes, refer to Appendix C - Input
Modes and Characters on page 106.
Enter special characters.
Press to select the space character or the
following special characters: _’ ” = / \ ^ ; : . , - + *
# § % & @ ? ! ¿ ¡ ( ) { } [ ] < > ¥ $ ￡ | ~ ¤
For Key:
- If it is in the uppercase (ABC soft key),
uppercase and lowercase (Abc soft key) or
lowercase (abc soft key) input modes, it will
provide space character and the following
special characters: . , ?, !, 0.
- If it is in the numeric (123 soft key) input
mode, it will only provide the digit 0.
- Long press the key to enter the character +.
For other input modes, refer to Appendix C - Input
Modes and Characters on page 106.
Delete text you entered.
Press or to position the cursor to the right
of the text you want to delete, and then press the
Del soft key to delete one character at a time or
long press to delete all characters.