MSpeaker II - Data Sheet

www.yealink.com
MSpeaker II
Yealink MSpeaker II is specially designed for video conferencing room, to award you a better sound in a meeting room. It
has two built-in speakers, providing powerful output to cover middle even large meeting room. Working with Yealink micro-
phone and Yealink Noise Proof Technology, it brings a crystal and vivid audio experience to everyone.
MSpeaker II supports PoE, which enables simple and easy deployment, in this way, power supply, audio data transmission
and signal control unies as one, sharply reducing the complex installation procedures as well as the costly expenses.
And MSpeaker II also supports 3.5mm AUX input to be compatible with more video conferencing solution.
Audio Output
•
Stereo speakers
•
Frequency respond: 100Hz-20KHz
•
RMS: 10W
Audio Input
•
1 x VCH (RJ45), supports PoE (802.3af)
•
1 x 3.5mm Line-in
Specications
Other Interfaces
•
Built-in Bluetooth (for future use)
•
Power Input:
-
DC 48V/0.7A
-
PSE 54V 0.56A or PoE 48V 0.27A
Physical Features
•
Dimension (W.D.H): 500mm x 60mm x 86mm
•
Operating humidity: 5~90%
•
Operating temperature: 0~40°C
Package Includes
•
MSpeaker II
•
Power Adapter
•
3m audio cable (3.5mm)
•
Wall Mount Bracket
•
Quick Start Guide
Compliance
REACH
CCC
Connection
Do one of the following to connect MSpeaker II to the video conferencing system or the UVC series camera:
1. Connect the MSpeaker II via 3.5mm audio cable 2. Connect MSpeaker II via Ethernet cable
The Line Out port on the video con-
ferencing system or the UVC series
camera
The VC Hub/Phone port on the
video conferencing system or the
Microphone port on the UVC series
camera
3.5mm
音频线
Video Conferencing Soundbar