User manual

transfer. For Yealink phones, there’s an option for you to enable/disable semi-attended
transfer.
Access to the phone webpagePhoneFeaturesTransfer Settings
4. Q: How to increase the volume on Speaker & on Headset?
A: The volumes in different cases are separated. Anytime you want to increase or reduce the
voice you are hearing, just use the volume buttons under the navigation keys. When in idle,
it tunes the ringer volume. In talking status, it tunes the receiving volume. In dialing status, it
tunes the volume for dial tone. When you are using speaker, it tunes for speaker and when
you are using headset, it tunes for headset. The sending volume can only be adjusted via
auto provision for now.
5. Q: Why the phone play tone when held, how can I disable it?
A: When the phone is hold, it will play out tone every 30 seconds to prompt that the phone
is being hold status. There is a parameter PlayHoldTone in feature page of T2X phone, also
PlayHoldToneDelay defines the interval time.
If you disable this parameter, the phone will not play out tone when held.
6. Q: How can I use the Group Listening feature?
A: You can configure one DSS key with Group Listening feature. By pressing the Group
listening key, you can activate two modes, handset +speaker mode, and headset + speaker
mode. In these two modes, you can talk with the other party with the handset or headset,
the other people only can hear the voice from the speaker.
During talking, pressing the Group Listening key to enable this feature, if you press this key
again, it will disable this feature.
7. Q: What is Call Completion feature?
A: You can use the call completion feature to notify the caller of a failed call when the callee
becomes available to receive a call.