User guide

Appendix
69
SIP-T42G/T41P)
managements
erver.periodic
_inform_enabl
e =
(not
applicable to
SIP-T42G/T41P)
0 or 1
It enables or disables the phone to
report its configuration to the ACS.
0-Disabled
1-Enabled
The default value is 1.
It takes effect after reboot.
Settings->TR069->
Enable Periodic
Inform
managements
erver.periodic
_inform_interv
al =
(not
applicable to
SIP-T42G/T41P)
Integer
from 5 to
42946967295
It configures the interval (in seconds)
for the phone to report its configuration
to the ACS.
The default value is 60.
It takes effect after reboot.
Settings->TR069->
Periodic Inform
Interval (seconds)
transfer.semi_
attend_tran_e
nable =
0 or 1
It enables or disables the transferee
party’s phone to prompt a missed call
on the LCD screen before displaying
the caller ID.
0-Disabled
1-Enabled
The default value is 1.
Features->Transfer
->Semi-Attend
Transfer
transfer.blind_
tran_on_hook_
enable =
0 or 1
It enables or disables the phone to
complete the blind transfer through
on-hook.
0-Disabled
1-Enabled
The default value is 1.
Features->Transfer
->Blind Transfer On
Hook
transfer.on_ho
ok_trans_ena
ble =
0 or 1
It enables or disables the phone to
complete the attended transfer
through on-hook.
0-Disabled
1-Enabled
The default value is 1.
Features->Transfer
->Semi Attend
Transfer On Hook
transfer.dsske
y_deal_type =
0,1 or 2
It defines the line key behavior during
an active call when user presses the
line key and the line key is configured
as a transfer or BLF key.
0-New Call
Features->Transfer
->Transfer Mode
Via Dsskey