User guide

Yealink SIP-T4X IP Phones Auto Provisioning Guide
60
wui.http_enab
le =
0 or 1
It enables or disables the HTTP
protocol for web server access.
0-Disabled
1-Enabled
The default value is 1.
It takes effect after reboot.
Network->
Advanced->Web
Server->HTTP
wui.https_ena
ble =
0 or 1
It enables or disables the HTTPS
protocol for web server access.
0-Disabled
1-Enabled
The default value is 1.
It takes effect after reboot.
Network->
Advanced->Web
Server->HTTPS
network.port.h
ttp =
Integer
from 1 to
65535
It configures the HTTP port for web
server access.
The default value is 80.
It takes effect after reboot.
Network->
Advanced->Web
Server->HTTP Port
(1~65535)
network.port.h
ttps =
Integer
from 1 to
65535
It configures the HTTPS port for web
server access.
The default value is 443.
It takes effect after reboot.
Network->
Advanced->Web
Server->HTTPS Port
(1~65535)
network.port.
max_rtpport =
Integer
from 1024
to 65535
It configures the maximum local RTP
port.
The default value is 11800.
It takes effect after reboot.
Network->
Advanced->Local
RTP Port-> Max RTP
Port (1~65535)
network.port.
min_rtpport =
Integer
from 1024 to
65535
It configures the minimum local RTP
port.
The default value is 11780.
It takes effect after reboot.
Network->
Advanced->Local
RTP Port->Min RTP
Port (1~65535)
network.qos.rt
ptos =
Integer
from 0 to 63
It configures the voice QoS.
The default value is 46.
It takes effect after reboot.
Network->
Advanced->Voice
QoS->Voice QoS
(0~63)
network.qos.si
gnaltos =
Integer
from 0 to 63
It configures the SIP message QoS.
The default value is 26.
It takes effect after reboot.
Network->
Advanced->Voice
QoS->SIP Qos
(0~63)