User guide

Yealink SIP-T4X IP Phones Auto Provisioning Guide
56
ay =
the Internet (WAN) port type for IPv4 is
configured as Static IP Address.
The default value is blank.
It takes effect after reboot.
Gateway
network.prima
ry_dns =
IP address
It configures the primary IPv4 DNS
server when the IP address mode is
defined as IPv4 or IPv4&IPv6, and the
Internet (WAN) port type for IPv4 is
configured as Static IP Address.
The default value is blank.
It takes effect after reboot.
Network->IPv4
Config->Static IP
Address->Primary
DNS
network.secon
dary_dns =
IP address
It configures the secondary IPv4 DNS
server when the IP address mode is
configured as IPv4 or IPv4&IPv6, and
the Internet (WAN) port type for IPv4 is
configured as Static IP Address.
The default value is blank.
It takes effect after reboot.
Network->IPv4
Config->Static IP
Address->
Secondary DNS
network.pppo
e.user =
(not
applicable to
SIP-T42G/T41P)
String
It configures the user name for PPPoE
connection.
The default value is blank.
It takes effect after reboot.
Network->IPv4
Config->PPPoE->
User Name
network.pppo
e.password =
(not
applicable to
SIP-T42G/T41P)
String
It configures the password for PPPoE
connection.
The default value is blank.
It takes effect after reboot.
Network->IPv4
Config->PPPoE->
Password
network.ipv6_i
nternet_port.ty
pe =
0 or 1
It configures the Internet (WAN) port
type for IPv6 when the IP address
mode is configured as IPv6 or
IPv4&IPv6.
0-DHCP
1-Static IP Address
The default value is 0.
It takes effect after reboot.
Network->IPv6
Config
network.ipv6_
prefix =
Integer
from 0 to 128
It configures the IPv6 prefix when the IP
address mode is configured as IPv6 or
IPv4&IPv6, and the Internet (WAN) port
Network->IPv6
Config->Static IP
Address->IPv6