User guide

Appendix

4. Locate the root directory from the local system. Select the kind of folder which you

want.

5. Check the server URL “http:// IP:Port/” in the “Open in browser” address bar (For

example, the server URL ”http:// 10.2.11.101:8088/” is shown on the screenshot) . We

recommend that you can fill the server URL in the address bar of the web browser

and then press <Enter> key to check the HTTP server before provisioning.

Yealink IP phones also support the Hypertext Transfer Protocol with SSL/TLS (HTTPS)

protocol for auto provisioning. HTTPS protocol provides the encrypted communication and

secure identification. For more information on installing and configuring an Apache HTTPS

Server, refer to the network resource.

This section provides instructions on how to configure a DHCP server for windows using

DHCP Turbo. You can download this software online:

http://www.tucows.com/preview/265297 and install it following the setup wizard.

Before configuring the DHCP Turbo, make sure that:

 The firewall on the PC is disabled.

 There is no DHCP server in your local system.

To configure the DHCP Turbo:

1. To start the DHCP Turbo application, double click localhost.