User guide

Yealink SIP-T4X IP Phones Auto Provisioning Guide
112
2-2min
5-5min
10-10min
30-30min
phone_setting
.ring_for_tranf
ailed =
Ring1.wav
Ring2.wav
....
Ring8.wav
It configures the ringtone when the
phone fails to transfer a call.
Note: Ring 6-8 are not applicable to
the SIP-T42G/T41P IP phones.
phone_setting
.logon_wizard
=
0 or 1
It enables or disables the phone to
show the logon wizard during startup.
0-Disabled
1-Enabled
The default value is 0.
Features->General
Information->
Logon Wizard
phone_setting
.is_deal180 =
0 or 1
It enables or disables the phone to
deal with the 180 SIP message
received after the 183 SIP message.
0-Disabled
1-Enabled
The default value is 1.
Features->General
Information->180
Ring Workaround
phone_setting
.dialnow_dela
y =
Integer
from 1 to 14
It configures the delay time (in
seconds) for the dial-now rule.
The default value is 1.
Features->General
Information->
Time-Out For
Dial-Now Rule.
phone_setting
.custom_softke
y_enable =
0 or 1
It enables or disables customizing the
softkey layout.
0-Disabled
1-Enabled
The default value is 0.
Settings->Softkey
Layout->Custom
Softkey
phone_setting
.headsetkey_
mode =
0 or 1
It configures headset mode
precedence during a call.
0-Always use (pressing the
speakerphone key and picking up the
handset are not effective when the
headset mode is activated)
1-Use as normal
The default value is 1.
phone_setting
.emergency.n
Phone
number
It configures emergency numbers.
Emergency numbers are separated by
Features->Phone
Lock->Emergency