User guide

Appendix
111
nlock_pin =
The default value is 123.
Unlock PIN (0~15
Digital)
phone_setting
.phone_lock.lo
ck_time_out =
Integer
from 0 to
3600
It configures the interval (in seconds)
to automatically lock the keypad.
The default value is 0 (the keypad can
be locked only by pressing the keypad
lock key).
Features->Phone
Lock->Phone Lock
Time Out (0~3600s)
phone_setting
.ring_type =
Ring1.wav,
Ring2.wav,
……
Ring8.wav
It configures the ringtone for the
phone.
Example:
phone_setting.ring_type = Ring1.wav
The default value is Ring1.wav.
Note: Ring 6-8 are not applicable to
the SIP-T42G/T41P IP phones.
Settings->
Preference->Ring
Type
phone_setting
.active_backli
ght_level =
(not
applicable to
SIP-T42G/T41P)
Integer
from 1 to 10
It configures the level of the active
backlight intensity.
The default value is 8.
Settings->
Preference->
Backlight On
Intensity
phone_setting
.inactive_back
light_level =
(not
applicable to
SIP-T42G/T41P)
0 or 1
It configures the phone to go out or
reduce intensity of the backlight on the
LCD screen after a period of inactivity.
0-Off
1-Low
The default value is 1.
Settings->
Preference->
Backlight Idle
Intensity
phone_setting
.backlight_tim
e =
1, 60, 120,
300, 600 or
1800 (for
T46G)
0, 1,2,5,10 or
30 (for
T42G/T41P)
It configures the backlight time (in
seconds).
For SIP-T46G:
1-Always on
60-1min
120-2min
300-5min
600-10min
1800-30min
The default value is 1.
For SIP-T42G/T41P:
0-Always on
1-1min
Settings->
Preference->
Backlight Time