User guide

Appendix
101
The default value is 0.
features.dnd.o
n_code =
String
It configures the DND on code when
the DND mode is configured as Phone.
Features->Forward
& DND->DND->
DND On Code
features.dnd.o
ff_code =
String
It configures the DND off code when
the DND mode is configured as Phone.
Features->Forward
& DND->DND->
DND Off Code
features.dnd.e
mergency_en
able =
0 or 1
It enables or disables the phone to
receive the calls from the authorized
number when the DND is enabled.
0-Disabled
1-Enabled
The default value is 0.
Features->Forward
& DND->DND->
DND Emergency
features.dnd.e
mergency_aut
horized_numb
er =
String
It configures the authorized number
when the DND is enabled.
Multiple numbers are separated by
comma.
The default value is blank.
Features->Forward
&DND->DND->
DND Authorized
Number
call_waiting.e
nable =
0 or 1
It enables or disables call waiting
feature.
0-Disabled
1-Enabled
The default value is 1.
Features->General
Information->Call
Waiting
call_waiting.o
n_code =
String
It configures the call waiting on code
to activate the server-side call waiting
feature.
The default value is blank.
call_waiting.of
f_code =
String
It configures the call waiting off code
to deactivate the server-side call
waiting feature.
The default value is blank.
call_waiting.to
ne =
0 or 1
It enables or disables the phone to
play the call waiting tone.
0-Disabled
1-Enabled
The default value is 1.
Features->Audio->
Call Waiting Tone
features.interc
om.allow =
0 or 1
It enables or disables the phone to
automatically answer an incoming
Features->Intercom
->Accept Intercom