User guide

Yealink SIP-T4X IP Phones Auto Provisioning Guide
96
push_xml.bloc
k_in_calling =
0 or 1
It enables or disables the phone to
block displaying the push XML
interface when in calling status.
0-Disabled
1-Enabled
The default value is 0.
Features->Remote
Control->Block
XML In Calling
push_xml.sip_
notify =
0 or 1
It enables or disables the phone to use
the push XML via SIP NOTIFY message.
0-Disabled
1-Enabled
The default value is 0.
Features-> Remote
Control->SIP Notify
features.actio
n_uri_limit_ip
=
IP addresses
or any
It configures the IP address of server
from which the phone receives the
action URI requests. Multiple IP
addresses are separated by comma.
If the value of this parameter is
configured as “any”, the phone will
receive action URI requests from any IP
server.
Features-> Remote
Control->Action
URI allow IP List
features.actio
n_uri_reboot_
now =
0 or 1
It enables or disables the phone to
perform reboot during a call when
receiving a specific action URI request
about reboot.
0-Disabled
1-Enabled
The default value is 0.
dialplan.area
_code.code =
Number
It configures the area code.
The default value is blank.
Settings->Dial
Plan->Area
Code->Code
dialplan.area
_code.min_len
=
Integer
from 1 to 15
It configures the minimum length of the
number prefixed with the area code.
The default value is 1.
Settings->Dial
Plan->Area
Code->Min Length
(1-15)
dialplan.area
_code.max_le
n =
Integer
from 1 to 15
It configures the maximum length of
the number prefixed with the area
code.
The value must be larger than the
minimum length.
The default value is 15.
Settings->Dial
Plan->Area
Code->Max Length
(1-15)