Specifications

Configuring Basic Features

2. Select the desired line and then press Enter soft key.

3. Press or , or the Switch soft key to select the desired value from the

Anonymous Reject field.

4. (Optional.) Enter the anonymous call rejection on code in the On Code field.

5. (Optional.) Enter the anonymous call rejection off code in the Off Code field.

6. Press the Save soft key to accept the change.

The Do Not Disturb (DND) feature allows the IP phones to ignore incoming calls. The

DND feature is based on a phone or per-account depending on the DND mode. The

following describes the two DND modes:

 Phone (default): When the DND mode is ―Phone‖, it means the DND feature is

effective for the IP phones.

 Custom: When the DND mode is ―Custom‖, it means that you can configure the

DND feature for each account.

A user can activate or deactivate the DND feature using a DND soft key or DND key.

DND activated on the IP phones disables the local call forward settings. The DND

configurations on IP phones may be overridden by the server settings.

The DND on code or DND off code configured on the IP phones is used to activate or

deactivate the server-side DND feature. They may vary on different servers.

Return Message When DND

This feature defines the return code and the reason of the SIP response message for the

rejected incoming call when DND is enabled on the IP phones. The caller’s phone LCD

screen displays the received return code.

Procedure

DND can be configured using the configuration files or locally.

Configuration File

<MAC>.cfg

Configure the DND feature in the

custom mode.

For more information, refer to

Do Not Disturb on page 261.

<y000000000028>.cfg

Assign a DND key.

For more information, refer to DND

Key on page 355.

Configure the DND mode.

Configure the DND feature in the

phone mode.