Specifications

Appendix
323
Format
Boolean
Default Value
1
Range
0-Disabled
1-Enabled
Example
network.snmp.enable = 0
Parameter-
network.snmp.port
Configuration File
<y000000000028>.cfg
Description
Specifies the port used for SNMP
communication.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Integer
Default Value
161
Range
0 to 65535
Example
network.snmp.port = 1008
Parameter-
network.snmp.trust_ip
Configuration File
<y000000000028>.cfg
Description
Specifies the SNMP server addresses from
which GET requests will be accepted.
You can specify one or more addresses,
multiple addresses are separated by
space.
If the value is set to ―0.0.0.0‖, the IP phone
can accept and handle GET requests from
any IP address.
If the value is left blank, the IP phone cannot
receive or handle any GET request.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
IP Address (IPv4 or IPv6) or Domain Name
Default Value
0.0.0.0
Range
At most 255 characters