Specifications

Configuring Advanced Features
169
Procedure
SNMP can be configured using the configuration files or locally.
Configuration File
<y000000000028>.cfg
Configure SNMP on the IP
phone.
For more information, refer to
SNMP on page 322.
Local
Web User Interface
Configure SNMP.
Navigate to:
http://<phoneIPAddress>/servl
et?p=network-adv&q=load
To configure SNMP via web user interface:
1. Click on Network->Advanced.
2. In the SNMP block, select the desired value from the pull-down list of Active.
3. Enter the desired port in the Port field.
4. Enter the address(es) (IPv4, IPv6 or domain name) of the SNMP server in the
Trusted Address field.
Multiple addresses are separated by space.
5. Click Confirm to accept the change.
A dialog box pops up to prompt that the settings will take effect after reboot.
6. Click OK to reboot the IP phone.