Specifications

Administrator’s Guide for SIP-T46G IP Phone
136
362.
Specifies a multicast codec for
the IP phone to use for multicast
RTP.
For more information, refer to
Sending RTP Stream on page 307.
Local
Web User Interface
Assign a multicast paging key.
Navigate to:
http://<phoneIPAddress>/servlet
?p=dsskey&model=1&q=load&li
nepage=1
Specifies a multicast codec for
the IP phone to use to send the
RTP stream.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-general&q=load
Phone User Interface
Assign a multicast paging key.
To configure a multicast paging key via web user interface:
1. Click on DSSKey->Line Key.
2. In the desired DSS key field, select Paging from the pull-down list of Type.
3. Enter the multicast IP address and port number in the Value field.
The valid multicast IP addresses range from 224.0.0.0 to 239.255.255.255.
4. Click Confirm to accept the change.
To configure a codec for multicast paging via web user interface:
1. Click on Features ->General Information.