Specifications

Yealink IP Phone XML Configurations
57
The IP address or domain name of the push XML server is specified in the Push XML
Server IP Address field. After configuration, the IP phone will be able to accept the
HTTP(s) POST from the server.
To configure the Push XML Server via web user interface (take the SIP-T46G IP phone as
an example):
1. Access the web interface of the phone.
2. Click on Features->Remote Control.
3. Enter IP addresses or domain names in the Push XML Server IP Address field.
The valid values must be within 512 characters. Each IP address or domain name
is separated by a comma. If leaving this field blank, the phone will reject HTTP
POST messages from any server.
4. Click Confirm to accept the change.
You can configure the XML SIP Notify via web user interface. It will enable or disable
SIP NOTIFY messages to be processed by the phone.
To configure the XML SIP Notify via web user interface (take the SIP-T46G IP phone as
an example):
1. Access the web interface of the phone.
2. Click on Features->Remote Control.