Specifications

Basic Call Features
87
group and search for the contact (Directory should be configured in advance.
Refer to Directory on page 28 for more information).
- Press the Directory soft key, and then select History. Select the desired list and
press or to select the entry (Directory should be configured in
advance. Refer to Directory on page 28 for more information).
- Press the Directory soft key, and then select Remote Phone Book. Select the
desired group and search for the contact (Directory and Remote Phone Book
should be configured in advance. Refer to Directory on page 28 and Remote
Phone Book on page 39 for more information).
3. Press or to dial out.
4. Press the Transfer soft key to complete the transfer when receiving ringback.
To perform an attended transfer:
1. Press the Transfer soft key during a call.
2. Do one of the following:
- Enter the number you want to transfer the call to.
- Press the Directory soft key, and then select Local Directory. Select the desired
group and search for the contact (Directory and Remote Phone Book should be
configured in advance. Refer to Directory on page 28 for more information).
- Press the Directory soft key, and then select History. Select the desired list and
press or to select the entry (Directory should be configured in
advance. Refer to Directory on page 28 for more information).
- Press the Directory soft key, and then select Remote Phone Book. Select the
desired group and search for the contact (Directory and Remote Phone Book
should be configured in advance. Refer to Directory on page 28 and Remote
Phone Book on page 39 for more information).
3. Enter the number you want to transfer the call to.
4. Press or to dial out.
5. After the party answers the call, press the Transfer soft key to complete the transfer.
If you are using a handset, the transfer can be completed by hanging up the handset.
You can cancel the transfer before the call is connected by pressing the Cancel soft key.
You can enable or disable call waiting on the phone. If call waiting is enabled, you can
receive another call while there is already an active call on the phone. Otherwise,
another incoming call is automatically rejected by the phone with a busy message
when there is an active call on the phone. You can also enable or disable the phone to
play a warning tone when receiving another call.