Specifications

User Guide for the SIP-T42G IP Phone
44
To activate the headset mode:
1. Press on the phone.
The headset key LED illuminates solid green when the headset mode is activated.
Press the line key or the Answer soft key to answer an incoming call. The call will be
connected to your headset automatically.
Enter the desired number and press the Send soft key, the phone will then place a
call using the headset automatically. For more information on using the headset to
place a call, refer to Placing Calls on page 68.
To deactivate the headset mode:
1. Press again on the phone.
The headset key LED goes out when the headset mode is deactivated.
You can use headset in priority when headset prior feature is enabled. This feature is
especially useful for permanent or full-time headset users.
To enable headset prior via web user interface:
1. Click on Features->General Information.
2. Select Enabled from the pull-down list of Headset Prior.
3. Click Confirm to accept the change.