Installation Manual

Configuration Guide for User Access Level
91
Section Header
Parameters and
Default Value
Configuration Items on the Web User
Interface
(only applicable to
W56P IP DECT
phones)
[ HiddenSetting ]
custom-factory-conf
ig = 2
Hidden->Custom Factory Config
DND-Active = 2
Hidden->DND Active
Forward-Active = 2
Hidden->Forward Active
Broadsoft-Active =
2
(1 for SIP VP-T49G/
W52P/W56P IP
phones)
Hidden->Broadsoft Active
Redirect-Active = 2
(1 for SIP VP-T49G/
W52P/W56P IP
phones)
Hidden->Redirect Active
XSI-Active = 2
(not applicable to
SIP-T58V/T58A/T56
A/SIP VP-T49G IP
phones)
Hidden->XSI Active
UC-Active = 2
(1 for SIP VP-T49G
IP phones; only
applicable to SIP
VP-T49G/SIP-T54S/
T52S/T48G/T48S/T4
6G/T46S/T29G IP
phones)
Hidden->UC Active
remote_pcap_switch
= 2
(only applicable to
SIP-T54S/T52S/T48
G/T48S/T46G/T46S/
T29G IP phones)
Hidden->Remote Pcap
Hidden->Remote Pcap Port
Hidden->Remote Pcap Password
remote_pcap = 2
Hidden->Remote Pcap