Installation Manual

Configuration Guide for User Access Level
77
Section Header
Parameters and
Default Value
Configuration Items on the Web User
Interface
[ Settings-DialPlan
]
[ Settings-DialPlan
]
block-out = 0
Settings->Dial Plan->Block Out (the whole
page)
replace-rule-control
= 0
Settings->Dial Plan->Replace Rule->Prefix
Settings->Dial Plan->Replace Rule->Replace
Settings->Dial Plan->Replace Rule->Account
(not applicable to SIP-T19(P) E2/CP860 IP
phones)
dial-now-control =
0
Settings->Dial Plan->Dial Now->Rule
Settings->Dial Plan->Dial Now->Account
(not applicable to SIP-T19(P) E2/CP860 IP
phones)
area-code-control =
0
Settings->Dial Plan->Area Code->Code
Settings->Dial Plan->Area Code->Min
Length (1-15)
Settings->Dial Plan->Area Code->Max
Length (1-15)
Settings->Dial Plan->Area Code->Account
(not applicable to SIP-T19(P) E2/CP860 IP
phones)
block-out-control =
0
Settings->Dial Plan->Block Out->BlockOut
NumberX(X=1,2,…,10)
Settings->Dial Plan->Block Out->Account
(not applicable to SIP-T19(P) E2/CP860 IP
phones)
[ Settings-Voice ]
echo-cancellation =
2
(0 for SIP VP-T49G/
W52P/W56P IP
phones)
Settings->Voice->Echo Cancellation
jitter-buffer = 2
(0 for SIP VP-T49G/
W52P/W56P IP
phones)
Settings->Voice->JITTER BUFFER