Installation Manual

Configuration Guide for User Access Level
76
Section Header
Parameters and
Default Value
Configuration Items on the Web User
Interface
[ Settings-Config ]
A/SIP VP-T49G IP
phones)
Server->Port
Syslog_Transport_Ty
pe = 2
(not applicable to
SIP-T58V/T58A/T56
A/SIP VP-T49G IP
phones)
Settings->Configuration->Syslog-> Syslog
Transport Type
Syslog_Level = 2
(not applicable to
SIP-T58V/T58A/T56
A/SIP VP-T49G IP
phones)
Settings->Configuration->Syslog->Syslog
Level
Syslog_Facility = 2
(not applicable to
SIP-T58V/T58A/T56
A/SIP VP-T49G IP
phones)
Settings->Configuration->Syslog->Syslog
Facility
Syslog_Prepend_Ma
c = 2
(not applicable to
SIP-T58V/T58A/T56
A/SIP VP-T49G IP
phones)
Settings->Configuration->Syslog->Syslog
Prepend MAC
ExportAllDiagnostic
Files = 2
(not applicable to
SIP-T58V/T58A/T56
A/SIP
VP-T49G/CP860 IP
phones)
Settings->Configuration->Export All
Diagnostic Files
replace-rule = 0
Settings->Dial Plan->Replace Rule (the whole
page)
dial-now = 0
Settings->Dial Plan->Dial Now (the whole
page)
area-code = 0
Settings->Dial Plan->Area Code (the whole
page)