Installation Manual

Configuration Guide for User Access Level
71
Section Header
Parameters and
Default Value
Configuration Items on the Web User
Interface
[ Settings-Upgrad
e ]
phones)
reset_static_settings
= 2
(not applicable to
SIP VP-T49G IP
phones)
Settings->Upgrade->Reset static settings
(only appear when the parameter
“static.auto_provision.custom.protect” is set
to 1.)
reset_userdata = 0
(not applicable to
SIP VP-T49G IP
phones)
Settings->Upgrade->Reset userdata & local
config (only appear when the parameter
“static.auto_provision.custom.protect” is set
to 1.)
reset_local_config =
0
(only applicable to
SIP VP-T49G/CP860
IP phones)
Settings->Upgrade->Reset Local
Configuration (only appear when the
parameter “auto_provision.custom.protect” is
set to 1.)
reboot_device = 0
Settings->Upgrade->Reboot
upgrade_firmware =
0
(1 for SIP VP-T49G/
W52P/W56P IP
phones)
SIP-T58V/T58A/T56A/SIP VP-T49G:
Settings->Upgrade->Upgrade
SIP-T54S/T52S/T48G/T48S/T46G/T46S/T42G/
T42S/T41P/T41S/T40P/T40G/T29G/T27P/T27
G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860/W52P/W56P:
Settings->Upgrade->Select And Upgrade
Firmware
upgrade_handset_fir
mware = 1
(only applicable to
W52P/W56P IP
DECT phones)
Settings->Upgrade->Select and Upgrade
Handset Firmware
pnp-active = 2
Settings->Auto Provision->PNP Active
dhcp-active = 2
Settings->Auto Provision->DHCP Active
custom-option = 2
Settings->Auto Provision->Custom