Installation Manual

Configuration Guide for User Access Level
61
Section Header
Parameters and
Default Value
Configuration Items on the Web User
Interface
[ Features-ActionU
RL ]
(not applicable to
W52P/W56P IP
DECT phones)
-On = 2
Forward
No-Answer-Forward
-Off = 2
Features->Action URL->Close NoAnswer
Forward
TransferCall = 2
Features->Action URL->Transfer Call
Blind-transfer-call =
2
Features->Action URL->Blind Transfer
Attended-transfer-c
all = 2
Features->Action URL->Attended Transfer
Hold = 2
Features->Action URL->Hold
Unhold = 2
Features->Action URL->UnHold
Mute = 2
Features->Action URL->Mute
Unmute = 2
Features->Action URL->UnMute
Missed-call = 2
Features->Action URL->Missed Call
IPChange = 2
Features->Action URL->IP Changed
IdletoBusy = 2
Features->Action URL->Idle To Busy
BusytoIdle = 2
Features->Action URL->Busy To Idle
RejectIncomingCall
= 2
Features->Action URL->Reject Incoming Call
AnswerNewInCall =
2
Features->Action URL->Answer New-In Call
TransferFailed = 2
Features->Action URL->Transfer Failed
TransferFinished = 2
Features->Action URL->Transfer Finished
ForwardIncomingCa
ll = 2
Features->Action URL->Forward Incoming
Call
UCServer = 2
Features->Action URL->UCServer
(only appear when the parameter
“action_url.is_ume” is set to 1)
ReportIP = 2
Features->Action URL->Report IP
(only appear when the parameter
“action_url.is_ume” is set to 1)
AutopFinish = 2
Features->Action URL->Autop Finish
OpenCallWait = 2
Features->Action URL->Open Call Waiting