Installation Manual

Configuration Guide for User Access Level
38
Section Header
Parameters and
Default Value
Configuration Items on the Web User
Interface
shotlevel = 2
(0 for
SIP-T58V/T58A/T56
A/SIP VP-T49G IP
phones)
[ Network-Basic ]
ipaddress-mode = 0
(2 for SIP VP-T49G/
W52P/W56P IP
phones)
Network->Basic->Internet
Port->Mode(IPv4/IPv6)
ipv4config = 0
(2 for SIP VP-T49G/
W52P/W56P IP
phones)
Network->Basic->IPv4 Config
ipv6config = 0
(2 for SIP
VP-T49G/W52P/W5
6P IP phones)
Network->Basic->IPv6 Config
wan-ppoe = 2
(only applicable to
SIP-T58V/T58A/T56
A/SIP VP-T49G IP
phones)
Network->Basic->PPPoE
Network->Basic->PPPoE->User Name
Network->Basic->PPPoE->Password
[ Network-PCPort
]
pcport-active = 0
(not applicable to
CP860/W52P/W56P
IP phones)
Network->PC Port->PC Port Active
manual = 2
Network->NAT->Nat Manual