Installation Manual

Configuration Guide for User Access Level
26
Section Header
Parameters and
Default Value
Configuration Items on the Web User
Interface
account-handsetna
me = 0
(only applicable to
W52P/W56P IP
DECT phones)
Account->Handset Name (the whole page)
account-direct = 0
(only applicable to
SIP VP-T49G IP
phones)
Account->SIP IP Call (the whole page)
[ Account-Register
]
switch-account = 0
(not applicable to
SIP-T19(P) E2/CP860
IP phones)
Account->Register->Account
account_status = 0
Account->Register->Register Status
line_active = 0
Account->Register->Line Active
account_label = 0
Account->Register->Label
display_name = 0
Account->Register->Display Name
register_name = 01
Account->Register->Register Name
user_name = 01
Account->Register->User Name
account_password =
01
(2 for SIP VP-T49G/
W52P/W56P IP
phones)
Account->Register->Password
enabled-outbound-
proxy-server = 2
(01 for SIP VP-T49G
W52P/W56P IP
phones)
Account->Register->Enable Outbound Proxy
Server
outbound-proxy-ser
ver = 2
(01 for SIP
VP-T49G/W52P/W5
6P IP phones)
SIP-T58V/T58A/T56A/SIP VP-T49G:
Account->Register->Outbound Proxy Server
1
Account->Register->Outbound Proxy Server
1->Port