Installation Manual

Configuration Guide for User Access Level
133
Section Header
Parameters and
Default Value
Configuration Items on the Phone User
Interface
E2/CP860:
Menu->Call Control->Initial ACD State
callcontrol_setacdstate
=1
(11 for SIP VP-T49G IP
phones, not applicable
to SIP-T58V/T58A/T56A
IP phones)
SIP
VP-T49G/SIP-T54S/T52S/T48G/T48S/T46G/
T46S/T29G:
Menu->Features->Call Control->ACD State
SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:
Menu->Call Control->ACD State
callcontrol_securityclass
ification = 0
(not applicable to
SIP-T58V/T58A/T56A/SI
P VP-T49G/CP860 IP
phones)
SIP-T54S/T52S/T48G/T48S/T46G/T46S/T29
G:
Menu->Features->Call Control->Security
Classification
SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:
Menu->Call Control->Security
Classification
Configuration Parameters of Handset User Interface
The following table lists configuration items in the WebItemsLevel.cfg file with associated
configurations on the handset user interface of the W56P IP DECT phones:
Section
Header
Parameters and Default
Value
Configuration Items on the Handset
User Interface
[ GUI ]
Menu_Status = 0
OK->Status
Base = 0
OK->Status->Base
Handset = 0
OK->Status->Handset
LineStatus = 0
OK->Status->Line Status
Menu_Intercom = 0
OK->Intercom
Intercom_HSXS = 0
OK->Intercom->Handset X
Intercom_ALLHS = 0
OK->Intercom->All HS
Menu_VoiceMail = 0
OK->Voice Mail