Installation Manual

Configuration Guide for User Access Level
116
Section Header
Parameters and
Default Value
Configuration Items on the Phone User
Interface
[ GUI ]
SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:
Menu->Settings->Reset
Config->Advanced Settings->Reset static
settings (only appear when the parameter
“static.auto_provision.custom.protect” is set
to 1.)
ResetUserDataUserCfg
= 0
(not applicable to SIP
VP-T49G IP phones)
SIP-T58V/T58A/T56A:
Settings->Advanced->Reset Config->Reset
userdata & local config (only appear when
the parameter
“static.auto_provision.custom.protect” is set
to 1.)
Menu->Advanced->Reset Config->Reset
userdata & local config (only appear when
the parameter
“static.auto_provision.custom.protect” is set
to 1.)
ResetInternalSD = 0
(only application to
SIP-T58V/T58A/T56A IP
phones)
SIP-T58V/T58A/T56A:
Settings->Advanced->Reset Config->Reset
built-in SD card (only appear when the
parameter
“static.auto_provision.custom.protect” is set
to 1.)
reset_default = 0
(only applicable to SIP
VP-T49G IP phones)
SIP VP-T49G:
Menu->Advanced->Reset Config->Reset
Local Settings (only appear when the
parameter “auto_provision.custom.protect”
is set to 1.)
password = 0
SIP-T58V/T58A/T56A:
Settings->Advanced->Set Password
SIP
VP-T49G/SIP-T54S/T52S/T48G/T48S/T46G/
T46S/T29G:
Menu->Advanced->Set Password (Change
Password)
SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27