Manualshelf

Installation Manual

ManualsBrandsYealink ManualsOffice ElectronicsYealink SIP-T46G - Bundle of 8 SIP-T46G IP Phone (PoE)
111112113114115116117118119120
Configuration Guide for User Access Level
115
Section Header
Parameters and
Default Value
Configuration Items on the Phone User
Interface
[ GUI ]
Menu->Settings->Advanced
Settings->Reset Config->Reset local
settings (only appear when the parameter
“static.auto_provision.custom.protect” is set
to 1.)
ResetNonStaticConfig =
0
(not applicable to SIP
VP-T49G IP phones)
SIP-T58V/T58A/T56A:
Settings->Advanced->Reset Config->Reset
non-static settings (only appear when the
parameter
“static.auto_provision.custom.protect” is set
to 1.)
SIP-T54S/T52S/T48G/T48S/T46G/T46S/T29
G:
Menu->Advanced->Reset Config->Reset
non-static settings (only appear when the
parameter
“static.auto_provision.custom.protect” is set
to 1.)
SIP-T42G/T42S/T41P/T41S/T40P/T40G/T27
P/T27G/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:
Menu->Settings->Advanced
Settings->Reset Config->Reset non-static
settings (only appear when the parameter
“static.auto_provision.custom.protect” is set
to 1.)
ResetStaticConfig = 2
(not applicable to SIP
VP-T49G IP phones)
SIP-T58V/T58A/T56A:
Settings->Advanced->Reset Config->Reset
static settings (only appear when the
parameter
“static.auto_provision.custom.protect” is set
to 1.)
SIP-T54S/T52S/T48G/T48S/T46G/T46S/T29
G:
Menu->Advanced->Reset Config->Reset
static settings (only appear when the
parameter
“static.auto_provision.custom.protect” is set
to 1.)