Installation Manual

Configuration Guide for User Access Level

When logging in the web user interface with admin access level, the web user interface displays

as below:

For more information on parameters of the WebItemsLevel.cfg file, refer to Appendix-A：

Configuration Parameters on page 23.

For SIP-T58V/T58A/T56A/T54S/T52S/SIP

VP-T49G/SIP-T48G/T48S/T46G/T46S/T42G/T42S/T41P/T41S/T40P/T40G/T29G/T27P/T27

G/T23P/T23G/T21(P) E2/T19(P) E2/CP860 IP phones:

The following shows configuration segments for the phone user interface in the

WebItemsLevel.cfg file for reference:

If you set the access permission of the high level, it will have an impact on that of the low level.

In the following examples, the call forward menu has a higher level than always forward/busy

forward/no answer forward submenu.