User Guide
Table Of Contents
- About This Guide
- Table of Contents
- Overview
- Getting Started
- Packaging Contents
- Phone Installation
- Network Connection
- Phone Initialization
- Phone Status
- Basic Network Settings
- Wireless Network Settings
- Registration
- Idle Screen
- Entering Data and Editing Fields
- Customizing Your Phone
- Basic Call Features
- Advanced Phone Features
- Appendix
- Index
User Guide for the SIP-T41S IP Phone
84
4. Enter the desired line ID in the Account field or leave it blank.
5. Click Edit to accept the change.
To delete one or more replace rules via web user interface:
1. Click on Settings->Dial Plan->Replace Rule.
2. Select the one or more replace rules by checking the checkbox(es).
3. Click Del to delete the replace rule(s).
Note
Dial Now
You can configure one or more dial now rules (up 100) on your phone. When the dialed number
matches the dial now string, the number will be dialed out automatically. For example, a dial
now rule is configured as "2xx", any entered three-digit string beginning with 2 will then be
dialed out automatically on the phone.
To add a dial now rule via web user interface:
1. Click on Settings->Dial Plan->Dial Now.
2. Enter the desired value (e.g., 2xx) in the Rule field.
3. Enter the desired line ID in the Account field or leave it blank.
For more information on the valid values for the Account field, refer to Replace Rule on
page 83.
4. Click Add to add the dial now rule.
When you enter the number “234” using the keypad, the phone will dial out “234”
automatically without the pressing of any key.
Note
You can also edit or delete the dial now rule, refer to Replace Rule on page 83 for more
information.
Dial-now rule is configurable via web user interface only.
Replace rule is configurable via web user interface only.