User Guide
Table Of Contents
- About This Guide
- Table of Contents
- Overview
- Getting Started
- Packaging Contents
- Phone Installation
- Network Connection
- Phone Initialization
- Phone Status
- Basic Network Settings
- Wireless Network Settings
- Registration
- Idle Screen
- Entering Data and Editing Fields
- Customizing Your Phone
- Basic Call Features
- Advanced Phone Features
- Appendix
- Index
User Guide for the SIP-T41S IP Phone
106
Call Forward
You can configure your phone to forward incoming calls to another party (static forwarding).
You can also forward incoming calls while your phone is ringing (dynamic forwarding).
Note
Static Forwarding
Three types of static forwarding are:
Always Forward: Incoming calls are immediately forwarded.
Busy Forward: Incoming calls are immediately forwarded if the phone is busy.
No Answer Forward: Incoming calls are forwarded if not answered after a period of time.
You can activate/deactivate call forward for the phone, or you can customize call forward for
each or all accounts.
There are two call forward modes:
Phone (default): Call forward is effective for the phone system.
Custom: Call forward can be configured for each or all accounts.
To configure the call forward mode via web user interface:
1. Click on Features->Forward&DND.
When the phone forwards a call, a prompt window will pop up by default. If you want to disable
the feature, contact your system administrator for more information.
You cannot activate or deactivate call forward when call forward feature is disabled. Contact your
system administrator for more information.